Search results for "Flexural modulus"
showing 10 items of 13 documents
Morphology, flexural, and thermal properties of sepiolite modified epoxy resins with different curing agents
2006
A bisphenol A-based epoxy resin was modified with 5 wt% organically modified sepiolite (Pangel B40) and thermally cured using two different curing agents: an aliphatic diamine (Jeffamine D230, D230) and a cycloaliphatic diamine (3DCM). The morphology of the cured materials was established by scanning and transmission electron microscopy analysis. The thermal stability, thermo-mechanical properties, and flexural behaviour of the sepiolite-modified matrices were evaluated and compared with the corresponding neat matrix. The initial thermal decomposition temperature did not change with the addition of sepiolite. The flexural modulus of the epoxy matrix slightly increases by the incorporation o…
Electrically induced deformation of giant liposomes monitored by thickness shear mode resonators.
2006
Thickness shear mode resonators are capable of registering small changes in the thickness and viscoelastic properties of ultrathin films attached to their surface. It was found that it is possible to monitor the deformation of surface-bound giant liposomes by applying an electric field with small amplitudes. Changes in the apparent height of attached vesicles in the nanometer range were easily detected as a function of lipid composition. Increasing the bending modulus by adding cholesterol results in a significantly reduced deformation from 16.8 nm (5% cholesterol) down to 3.2 nm (20% cholesterol), rendering this new method a robust and sensitive tool to detect the bending elasticity of lip…
Biomechanics and functional morphology of a climbing monocot.
2015
Climbing monocots can develop into large bodied plants despite being confined by primary growth. In our study on Flagellaria indica we measured surprisingly high stem biomechanical properties (in bending and torsion) and we show that the lack of secondary growth is overcome by a combination of tissue maturation processes and attachment mode. This leads to higher densities of mechanically relevant tissues in the periphery of the stem and to the transition from self-supporting to climbing growth. The development of specialised attachment structures has probably underpinned the evolution of numerous other large bodied climbing monocot taxa.
Flexural behaviour of external R/C steel fibre reinforced beam-column joints
2011
ABSTRACT A softened strut-and-tie macro model able to reproduce the flexural behaviour of external beam-column joint is presented. The model is specific for concrete with hooked steel fibres (FRC) and it is designed to calculate the flexural response, as load-deflection curve, of a beam-column sub-assemblages. The model considers the presence of a constant vertical load acting on the column and of a monotonically increasing lateral force applied at the tip of the beam.
Mechanical properties of pultruded glass fiber-reinforced plastic after moistening
2012
Abstract The kinetics of moisture sorption under immersion in water at room and elevated temperatures and flexural characteristics of dry (conditionally initial) and wet (moistened up to saturation level) composite material were investigated on flat specimens of polyester based glass fiber-reinforced plastic, cut from I-beam pultruded profile. It was found that the coefficients of diffusion and swelling are different in three principal axis of the composite. The former have the largest value in fiber axis direction, but the latter – in transverse to fiber axis direction out of plane of the layers. The observed difference in kinetics of mass gain and change of volume strain for the specimens…
Longitudinal Flexure as a Method for Determining the Flexural Strength of Composite Materials
2004
A method is presented for determining the flexural strength of composites from tests on pinned specimens in axial compression. This scheme is close to the so-called Euler buckling model, but the load is applied eccentrically, and the bar is bent practically from the beginning of loading. An analytical model is proposed for calculating the flexural stress in longitudinal flexure of a thin bar in the case of large displacements. The problem is solved in elliptic integrals of the first and second kinds. The analytical model shows an excellent agreement with experiments. The results obtained are compared with experimental tension data. A device is also designed for testing composite bars in lon…
Mechanical Properties of Pore-Spanning Lipid Bilayers Probed by Atomic Force Microscopy
2006
AbstractWe measure the elastic response of a free-standing lipid membrane to a local indentation by using an atomic force microscope. Starting point is a planar gold-coated alumina substrate with a chemisorbed 3-mercaptopropionic acid monolayer displaying circular pores of very well defined and tunable size, over which bilayers composed of N,N,-dimethyl-N,N,-dioctadecylammonium bromide or 1,2-dioleoyl-3-trimethylammonium-propane chloride were spread. Centrally indenting these “nanodrums” with an atomic force microscope tip yields force-indentation curves, which we quantitatively analyze by solving the corresponding shape equations of continuum curvature elasticity. Since the measured respon…
Sepiolite-reinforced epoxy nanocomposites: Thermal, mechanical, and morphological behavior
2010
A bisphenol A-based epoxy resin was modified with pristine sepiolite and an organically surface-modified sepiolite and thermally cured using two different curing agents: an aliphatic and a cycloaromatic diamine. The nanocomposites were characterized by dynamic mechanical analysis (DMA), rheology, thermogravimetric analysis (TGA), and electron microscopy. The initial sepiolite–epoxy mixtures show a better dispersion for the sepiolite-modified system that forms a percolation network structure. Mechanical properties have also been determined. The flexural modulus of the epoxy matrix slightly increases by the incorporation of the organophilic sepiolite. The flexural strength of the sepiolite-mo…
Salt-fog spray aging of jute-basalt reinforced hybrid structures. Flexural and low velocity impact response
2017
Abstract In this work, a study on the aging resistance of jute and jute-basalt interply hybrid laminates exposed to salt-fog is presented with the aim to investigate the possibility to enhance the durability of natural fiber reinforced composites for marine application by a ply-substitution approach. In particular, jute and basalt/jute reinforced composite plates were manufactured by vacuum assisted resin infusion in two different staking sequences (i.e., intercalated and sandwich-like basalt-jute) and aged under salt fog conditions. The effects of the accelerated aging at increasing times on the mechanical response of laminates were assessed in both quasi static (three point bending) and d…
Effect of moisture on elastic and viscoelastic properties of epoxy and epoxy-based carbon fibre reinforced plastic filled with multiwall carbon nanot…
2016
Abstract In this study, we investigated the peculiarities of moisture absorption and moisture-induced effects on the elastic and viscoelastic flexural properties of epoxy resin and carbon fibre reinforced plastic (CFRP) filled with multiwall carbon nanotubes (MWCNTs). Short-term cyclic creep-recovery tests of moistened epoxy and CFRP filled with MWCNTs revealed improvements in creep resistance for both materials. The addition of MWCNTs to the epoxy resin suppressed the moisture absorption by the material, causing a reduction in the diffusion coefficient by 31% and equilibrium moisture content by 15%. The addition of MWCNTs reduced the flexural strength of moistened epoxy and CFRP samples by…